Pages

Sunday, September 25, 2011

Bottoms up part 3: Rumble Tumble Coveralls

Coveralls sewing tutorial
coveralls sewing tutorial

Here's the story behind the series, the second part of the series is here.

For this edition of Bottoms Up series, I decided to bring you these coveralls. I love coveralls - the front yoke, the shoulder straps, the elastic in the back, all make for a very cute outfit. On the practical side, they are a perfect garment for a small powerhouse, the straps make sure that the pants stay in place during all the jumping, running and other toddler adventures. The denim or corduroy fabrics wear well through the daily washes that kids cloth endure.These will also be a good choice for cooler months ahead. So without further ado, here's how you can make your own Rumble Tumble coveralls.

Supplies:

Denim or corduroy fabric: 1.5 yard
Lining Fabric: 10 inchs X 10 inches 
Closures: 2 ( buttons or snaps )




sewing pattern coveralls

We're using the simple trouser pattern( page1, page 2) for these coveralls with some changes:
1. DONT cut it on fold now, you will need 4 pant pieces for these coveralls
2. Leave top 2 inches of the pants from the pattern, because we'll be making a separate waistband here.
    (Basically just fold 2 inches from the top of the pattern and ignore that part)
Cut all 4 pieces for the trouser from the pattern.  Remember that you don't need a waistband for this pattern so the top of the pants is a little shorter than a regular trouser.

how to sew coveralls

Sew these parts like regular trousers. 
First sew the outer straight seams
Next sew the inseams of the pant legs.
Then turn one leg right side out and push into another leg and sew the crotch seam.
how to sew overalls





Now measure a rectangle of length 5 and width = circular width of the pants' top + 1inch.
Fold and cut it into half such that you get 2 strips of 2.5 X width
These pieces will serve as waistband.



sewing yoke to coveralls
For the yoke front cut an arc of 4 inches X 8 inches.

lining for the overalls yoke


Use it as a template to cut a similar sized lining piece. Sew the yoke and lining( right sides together) along the curve.


Snip some notches all around the seam to help it retain shape after turning out. Turn inside out.

turing out the yoke

Fold into half along the width, and snip a small notch to mark the center.

sewing shoulder straps for overalls

Now lets make shoulder straps:

Cut 2 strips of 4 inches width and 25 inches length. Fold into half along the length and sew along the longer side to make a long tube, turn out. Now iron these straps such that the seam is in the center of one side.

Assembling the yoke and waistband of the coverall:


Take both the 2.5X width strips we earlier cut for waistband. Mark their centers by folding them in half and snipping a notch in them.


Now align the raw edges of yoke and waistband strips such that yoke is sandwiched between right sides of the waistband strips and the notches that mark center of all three layers line up. Sew a seam along the yoke length.

Here's how it will look.


Now sew the waistband to the pant by aligning one raw edge of waistband with the raw edge of pants. Here you need to make sure that not only their right sides are together, but also, you are sewing the side that will keep the yoke right side on the front, after you turn out. You can sew a few stitches and check to see if you're doing it right.



Go all around the pants, joining waistband to the pants. When you reach close to the ends, measure how much you need to finish and use the rest of strip as sewing margins. Sew both ends together. Now finish sewing the seam to join waistband and pants.


This is how it will look at the back. Now place you shoulder straps in the back such that the seam on the straps in facing you. Place the straps 2.5 inches apart at the center of back. Now cover them with the other waistband strip such that it sandwiches both the straps in between waistband.Sew along the raw edges of waistband, making sure you are catching the straps.


Now iron half an inch of the raw side of waistband to fold on the inside.

Now lets insert the elastic in the back:
Sew along the waistband seam (ONLY IN THE BACK), as close to the seam as you can but not over it. This will ensure that you catch the folded waistband on the inside of the pant.



Once you have done this at the back, insert an elastic from one end of back, pull it out at the other end of back. Pull the elastic a bit to gather the waistband. I gathered the waistband about 2 inch lesser than its width
to make it snug in the back. Now sew it on both ends to secure it. Sew along the rest of the seam to finish attaching the waistband.


Now add some closures to the yoke and shoulder straps. You can finish the raw ends of shoulder straps by
serging them, or by pushing them inside a little and top-stitching.

how to sew coveralls

At this point I highly recommend trying these on the baby to determine exact length desired. Mark the appropriate length and use the rest of the length to finish the hems by folding twice and sewing.

rumble tumble coveralls tutorial

Rumble Tumble coverall is ready to accompany your toddler in all her adventures.

11 comments:

  1. Did you get my comment? Not sure why I'm having trouble...anyway, great job on the tutorial!
    Thanks so much for dropping by and sharing at the Tuesday To Do Party!
    Smiles!
    Jami
    www.blackberryvine.blogspot.com

    ReplyDelete
  2. Love how it turned out! Thanks so much for linking up with us at Show & Share! Hope you’re joining us again this week!
    http://mylilpinkpocket.blogspot.com/2011/10/show-share-8.html

    Marie
    Mylilpinkpocket.blogspot.com

    ReplyDelete
  3. what if I wanted to make snow pants or snow bib. any ideas on that? would the same pattern work, allow more width or what? snow pants are kind of expensive I am finding...

    ReplyDelete
  4. Thanks for the post. It’s hard to find knowledgeable people on this topic, but you sound like you know what you’re talking about.Great post.
    Regards,
    ROTHCO

    ReplyDelete
  5. This is great! What size does it fit? I have 4 nieces - 2, 3, 5, 6 (all living in a different country) - how would I go about making a set to fit each girl?
    Thanks!

    ReplyDelete
  6. Hi Kassie,

    Thanks for your interest in the coveralls tutorial. I made those for my 1.5 year old at the time. However, if you have a pair of pants that fit the child, you could make the coveralls in any size you want. The tutorial
    is generic.Even if you don't have pants for measure, you could guess. The trick here is that since the coveralls have shoulder straps even if they are a bit loose at the waist it would work. So you could ask your daughter/son to measure their waists and length from waist down and use those measurements to draw a template.

    Hope it helps,
    Anshu

    ReplyDelete
  7. Hi Kasie thanks for the tutorial, makes it really clear thanks

    ReplyDelete
  8. Hi Manzoor,

    Thanks for stopping by. My name is Anshu, by the way.

    Thanks,
    Anshu

    ReplyDelete
  9. Corduroy is the perfect choice for this outfit, Anshu. It's so practical and looks great. Thanks for sharing your comprehensive and easy to follow tutorial.

    ReplyDelete
  10. The next time I read a blog, Hopefully it won't fail me as much as this one. I mean, Yes, it was my choice to read, but I genuinely thought you would probably have something helpful to say. All I hear is a bunch of whining about something you could fix if you weren't too busy seeking attention.
    FR Suits

    ReplyDelete

Leave some sugar :)