Showing posts with label accessories. Show all posts
Showing posts with label accessories. Show all posts

Friday, December 23, 2011

December sewing - pint sized accessories

Blooms and Bugs Studio: Sewing Kids Accessories


So I finally realized that its December already and whats winter without some ( a lot of ) accessories. I stumbled upon this superb tutorial from "From An Igloo" and just had to make it. The pattern is so good and it came together so easily that I made more ( for gifts).
If you're looking for a hat pattern, look no more. Make these...pronto...ok!



I finally succumbed to the bunting trend that has been over the blogosphere for a while now ( Is it too late already? No. Don't answer that question). I made some kiddie scarflets and used bunting appliques to decorate these.

The best part - Kiddo loves them. She keeps saying "Mama I'm dinosaur...lol"

Pin It

Wednesday, September 14, 2011

Knotted baby hat tutorial

Sewing for baby: Knotted hat tutorial
I did this guest post over at Whip Up a few weeks ago. Since then, I have modified the pattern a bit, so the final product looks more finished. Posting it here in case you missed it over at Whip Up and also adding the revised steps (in blue).



With the birth of my niece last month, newborn gifts are on my mind these days...Here's a tutorial for making a knotted hat for newborns. I love making and gifting these hats....because they are useful and practical?....naah...because seriously, what's cuter than a teeny-tiny hat on a teeny tiny head. The fact that hats are particularly pricey and difficult to find in ready-to-wear clothes doesn't hurt either. So without further ado...here's how to make one:

Supplies:

Knit fabrics: Take 2 pieces of same fabric or two different fabric. 

This is a great project to use up those scraps that are too big to throw away but too irregular to make into a dress, top etc.

1. Print out the pattern, tape the two pages as shown and cut both pieces of pattern ( total 3 cuts). Piece 1 spans both the pages whereas Piece 2 is only on Page 1.
Once you cut out all the three pieces, tape both parts of Piece 1 by overlapping the small part over the bigger part, up to the dash (-) mark.


2. 

Fold each fabric in two layers, then fold one more time. Place each pattern piece on fold and cut. So now you have two pieces of 1 and two pieces of 2.

3.

 Sew together pieces of 1 along the conical side, right sides together. Sew together pieces of 2 along the semi-circular side, right sides together. 

Note: Leave  a 2 inch opening while sewing piece 2 ( lining). This is an improvement from earlier version where I leave the opening at the joining seam in step 4.

4. 

Now join 1 and 2 by sewing along the raw edge, right sides together. Leave about 2 inch opening.
Note: It was only after sewing a couple of these hats, that I realized I should have left the opening in inner lining piece instead of the seam joining the two pieces. It was one of those "Duh...I'm so stupid" moment.

5. 

Using the opening, turn the whole thing inside out. Use a pencil or point turner to poke the cone out on fabric 1. 
Note: Slip-stitch the opening in fabric 2 shut. I missed this step when I wrote the guest post. 

Push the fabric 2 inside fabric 1. 

6.

Tie a knot with the cone of fabric 1. 
If the hat is a little big, you can turn some of the bottom out to fit the head of the baby. The best part is that these hats don't have a any inside seams to bother the baby skin. Enjoy your little munchkin...hats and all.

Tuesday, August 2, 2011

Summer Spring Necklace Tutorial

Ribbon and Beads Necklace Tutorial

I did this guest tutorial on Blissful and Domestic a few weeks ago, publishing it here again in case you missed it back then.

What you need:
Some beads: about 15-20 depending on the size. I used teardrop beads simply because I didn't have
any round ones in my stash. In the end though they arranged themselves in this very pretty and unique look.
You can try with whatever you have. I have seen many necklaces made using the round beads and they look beautiful too.

Ribbon: Satin or Sheer organza ( ~2 yd - there will be leftover)
I personally don't think grosgrain or satin ribbon would look as good, but you can play around with your choices and choose whatever you like.

Plastic thread: To thread beads and ribbon into a necklace. I used it because its more stable. I highly recommend it.

Some Tulle scraps. Optional

Mark 15 inches from one end of ribbon. This is where you will start adding beads to the ribbon. Now thread a needle with the plastic thread and tie a knot at the end. Now thread one bead with this thread. Once the needle is out of the bead, wrap it around and thread the same bead one more time. What we're doing here is trying to use the bead as a knot. For more stability loop your thread once through the loop over the bead as well.


Now make a 3/4 inch long running stitch on the ribbon starting at the 10 inches mark you marked earlier.


When the needle comes out at the end of this running stitch thread another bead, make another running stitch about the same length as earlier, thread another bead, make another running stitch.


What the above step will do is to get your ribbon to bunch up between your beads.
Repeat this cycle and thread about 10 beads. At this point pull your thread and gently bunch up the ribbon and beads as close as possible.Now check the whole thing against your neck to see if you are happy with
this size or you want more. If you need more keep adding the beads and making running stitches as shown earlier.

When you reach at the end pull the thread gently so the ribbon bunches up between the beads. Now you can tie a knot after wrapping around the bead again ( as we did in the beginning) and then sewing it back to ribbon.

Snip off any extra thread. Now tie the whole thing in your neck with a bow in the back. Snip off any extra length of ribbon.
If you had used tear drop beads they will arrange themselves in a fashion where one bead is up and next bead is down and the next bead is up again. If you notice a couple of stray beads just arrange them with your hand, because this is the most natural position for the beads to settle they stay in this position.

Your bead and ribbon necklace is ready.

Tie it behind your neck by making a bow and show off.
Options
You can spice it up more with these options:
1. After threading every bead make 2 running stitches instead of one. If the ribbon is pretty it will show more this way.

2. Cut some small tulle strips ( about 3 inches long and about the same width as the ribbon). Now thread the bead, make a running stitch on the ribbon and fold your tulle strip in an accordion fold  and thread the needle through it. Make another running stitch on the ribbon. If you have matching tulle this will soften the look and give the necklace a more romantic touch.
Play around with these options by using them for the middle 2-3 beads and threading the rest as the initial method.
Hang a pretty pendant in the center of the necklace by threading through it while you're making the running stitch on the ribbon.
There are so many variations here that you're limited by only your creativity!
Now go make one, make many!

Sunday, June 19, 2011

And pinwheels for lunch

I'm kind of addicted, I want to keep making these....

Pinwheels for the breakfast

I have been swooning over these pretties from the Mother Huddle. I finally broke down and made them today morning.
Here's my version:


Yeah, I need to get prettier fabrics to make these, but I made these in 15 mins flat. Doesn't that count for something?
Check out the full tutorial here.

In the past I have had better luck with clippies ( as in they stay on little one's head for more than 15 mins) than hairbands, so I'm super excited to have found this new idea.

PS: Not sure what it is but ever since little one saw this clippie she's been begging me to put it in her hair and actually keeping these on her head for hours. Now thats success!